Skip to main content

Camera Tool Overview

OneWare Studio has a Camera Tool that makes it possible to record images directly in OneWare Studio. It also has a Live Preview, where you can test a trained model on live images from a connected camera. You can even use the Camera Tool as a quality control station.

Access the camera tool in the menu AI > Camera Tool:

Camera Tool

Supported Camera Interfaces​

InterfaceBackendConnectionPlatformsRequirements
USB cameras (UVC / webcams)OpenCVUSBWindows (Media Foundation), Linux (V4L2), macOS (AVFoundation)None, detected automatically
GigE VisionAravisEthernetWindows, LinuxCamera and PC in the same subnet. Linux: GLib 2 (libglib-2.0) and libusb-1.0
USB3 VisionAravisUSB 3Windows, LinuxWindows: camera must use the WinUSB driver (e.g. installed with Zadig); cameras using a vendor driver are not listed. Linux: GLib 2, libusb-1.0 and a udev rule giving your user access to the camera
IDS camerasIDS peakUSB / GigE (IDS devices)Where IDS peak is availableIDS peak software must be installed

Notes​

  • All interfaces ship with the ONE AI extension; no extra plugin is needed.
  • Cameras are added in the Camera Tool via Add Camera, grouped by interface.
  • GigE on Windows: firewall rules apply per program location. If ONE WARE Studio runs from a new location (e.g. a portable install), the camera stream can be blocked. ONE AI detects a camera that stops sending images and offers to add a firewall rule (requires administrator rights).
  • Bandwidth: GigE and IDS cameras automatically lower their bandwidth limit when a slow network adapter (e.g. a USB Ethernet adapter) drops images.
Christopher - Development Support

Need Help? We're Here for You!

Christopher from our development team is ready to help with any questions about ONE AI usage, troubleshooting, or optimization. Don't hesitate to reach out!

Our Support Email:support@one-ware.com